单选题 网络工程师
题号 #484059

PPP(Point-to-Point Protocol)是SLIP(SerialLine IP protocol)的继承者,它提供了跨过同步和异步电路实现路由器到路由器(router-to-router)和主机到网络(host-to-network)的连接。CHAP(Challenge Handhake AuthenticationProtocol,挑战-握手验证协议)和PAP(Pass-word AuthenticationProtocol,口令验证协议)通常被用于在PPP封装的串行线路上提供安全陛认证。使用CHAP和PAP认证,每个路由器通过名字来识别,可以防止未经授权的访问。
路由器Router1和Router2的S0口均封装PPP协议,采用CHAP做认证,如图1所示。

图1路由器连接图
设置如下:

[问题1]上述配置中是否有问题?请指出并说明理由。

进入在线模考

参考答案

暂无

答案解析

路由器Router1和Router2的s0口均封装PPP协议,采用CHAP作认证,在Router1中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为router2。同时在Router2中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为router1。所建的这两用户的password必须相同。
Router1:
hostname router1 //路由器名为router1
usemame router2 password xxx//建立一用户,用户名为router2,口令为XXX
interface Serial0
ip address 192.200.10.1 255.255.255.0
encapsulation PPP //设置PPP封装
clockrate 1000000
PPP autbentication chap //设置PPP认证方法为chap
!
Router2:
hostname mater2
username routerl password xxx
interface Serial0
ip address 192.200.10.2 255.255.255.0
encapsulation PPP
PPP autbentieation chap

你可能感兴趣的试题

找试题 · 找答案 · 找资料 在线模考